The department was established in 2012，grow up with good mananement and technical team .Being specialized in SMT,A/I and DIPManufacturing. Now there are 6 professional SMT production line,7sets of A/I panasert and 2sets of DIP production line。
Equipment Intruduction
一.Solder paste printer：
At present, solder paste printing machine that we used is madefrom the DEK .With the machine we can produce the product size from 50X50mm to 508X508mm , in order to meet the production requirements of different products。
Equipment parameter :
Brand:DEK
Model:Horizon 03iX
Origin:England
Print accuary:> 2Cpk @ +/- 12.5um
Product size :50X50至510X508mm
Print speed: 12sec
Board thickness: 0.2--6mm
Deaen solder paste printing machine:
There are 3 sets of deaen solder paste printing machine, with the machine we can produce the product size from 50X50mmto 508X508mm. At the same time ,high print accuary will satisfy the production requirements of different products.
Equipment parameter:
Brand:DESEN
Model:DSP-1008
Origin:CHINA
Print accuary:>> 2Cpk @ +/- 12.5um
Product size :50X50至510X508mm
Print speed: 12sec
Board thickness: 0.6--6mm
二.3Dsolder paste printing machine
Wealso have SPI machine which is made from Korea PEMTRON.
Equipment parameter
Brand:PEMTRON
Model:PLX12-027
Product size :508X508mm
Print speed: 15sec/pcs [average]
Test range: thickness , area, volume
三.Chip mounter：
The machine is made from Japan JUK , with 3020VL and 3010L can produce the product size from 50*50mm to 410*360mm ,with JX100 and JX200 can produce the product size of 1200mm.Not only satisfy the product size demand but also is possible to produce article lamp products.
Equipment parameter
Brand:JUKI
Model:JUKI3101L/3020VL/JX100/JX200
Component size :0201—48mm
Print accuary: > 2Cpk @ +/- 0.03mm
Paster speed:23000point/H
Product size:50X50-----510X508mm
Product thickness: 0.5--6mm
FX-3RChip mounter：
Products size from 50*50mm to 510 *360mm , in order to meet the needs of different size products.
Equipment parameter
Brand:JUKI
Model:JFX-3R
Component size :0201—48mm
Print accuary: > 2Cpk @ +/- 0.03mm
Paster speed:90000point/H
Daily capacity: 1200000 point
Product thickness: 0.5--6mm
四.REFLOW：
There are 2sets of reflow produce lines .
Equipment parameter
Brand:HELLER
Model:1809MK
Temperature :<3℃
Accuary:>2Cpk
Temperature zone Num:Up and down each have nine zones
Product size: 600mm width
Performance: average temperature， convection heating，consistent quality
V-SOLTES REFLOW：
There are 3 sets of V-SOLTES REFLOW machines.
Equipment parameter
Brand:HEXI
Model::V-SOLTES
Temperature :<3℃
Accuary:>2Cpk
Temperature zone Num:Up and down each have 8 zones
Product size: 600mm width
Performance: average temperature， convection heating，consistent quality
五.AOI：
The machine is made from korea HURRICANE H580L.
Machine parameter
Brand: HURRICANE
Model：:H580L
Test speed：15sec/pcs （average）
Product size ：508X508mm
Test item：no component , minssing solder, reverse, excess solder and so on .
六.A/I：
Machine parameter
Brand: Huanqiu
Model:6830H
Pin space:0.35---7.5mm
Speed:16000point/h
Missing times: 0 (automatic detection)
Daily capacity: 350000 point
七.DIP production line：
There are 2 lines of DIP production lines, dailycapacity is 40000pcs
 |
